Braeger Ford helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
The video above shows you how to change a burnt out front turn signal bulb on your 2010 Ford F-150. If the turn signal (also known as a blinker or flasher) blinks rapidly or doesn't blink at all / stays stuck when engaged, this is your F-150's way of telling you that a turn signal bulb is burnt out. Troubleshooting for burnt out turn signal bulbs in your F-150 is relatively easy - turn your hazard lights on and check the front of your F-150 and then the back, whichever side is not illuminating is the side with the burnt out bulb. We recommend that you change both the driver and passenger side bulbs at the same time as they get dimmer over time and if one is out, then the other one is likely to burn out soon.
When changing the turn signal bulb in your F-150, be careful not to touch the glass portion of the bulb with your fingers as this will cause the bulb to burn out prematurely.
If your car is leaking a small amount of power steering fluid - see this video on how to fix the leak2010 Ford F-150 SVT Raptor 6.2L V8
Learn where your air filter is located and how to determine if it needs to be changed.2010 Ford F-150 SVT Raptor 6.2L V8
Don't be the guy with your third brake light burnt out2010 Ford F-150 SVT Raptor 6.2L V8
There's no reason to check the washer fluid level without adding some - see how to do it here!2010 Ford F-150 SVT Raptor 6.2L V8
If your battery has green or white cruddy deposits, it is probably not getting enough juice from and will likely wear out sooner2010 Ford F-150 SVT Raptor 6.2L V8
A/C blowing hot air?2010 Ford F-150 SVT Raptor 6.2L V8