David Hobbs helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
The video above shows how to check the belts on your 2010 Ford Fusion - if it gives more than a half inch when pressed, is cracked, frayed or appears shiny, you should change it (or have it changed) immediately. Worn belts in a Fusion are one of those things that can cause a lot of problems if ignored, while typically being fairly cheap and easy to replace. Check out our parts page for coupons on new belts for your Fusion!
The belts in your Fusion connect your engine to many of the components you use every day such as your air conditioner, battery (via the alternator), power steering and cooling system. As such, you may experience a dead battery, difficulty steering, overheating, etc. that might be due to a worn belt, not a faulty component! If your Fusion is one of those Fords that shrieks horrendously when it runs, you likely have a worn belt, bad tensioner or both.
Learn where your spare tire and jack are located before you need it on the side of the road2010 Ford Fusion SE 2.5L 4 Cyl.
One of the easiest fluids to top off - learn how to open the hood and where the reservoir is on your car2010 Ford Fusion SE 2.5L 4 Cyl.
Because you have to start somewhere2010 Ford Fusion SE 2.5L 4 Cyl.
Many cars will burn or leak a little bit of oil. Over time, this adds up and you might need to add some - learn how to here!2010 Ford Fusion SE 2.5L 4 Cyl.
Did you know that heat is worse for your battery than cold? Replace it every 4 years2010 Ford Fusion SE 2.5L 4 Cyl.
If your brake fluid is a little low, learn how to add some here. Ignoring a low level leads to big problems2010 Ford Fusion SE 2.5L 4 Cyl.