Oil & Filter Change 2010 Jeep Wrangler Unlimited X 3.8L V6

Jeep Wrangler Model Years - 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017

How to replace the oil filter and change oil in a 2010 Wrangler

Author

Hans Angermeier is an ASE certified Maintenance and Light Repair Technician and has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road. Over the past 10 years, Hans has been focused on building CarCareKiosk, which is visited by millions of drivers each month.

2010 Jeep Wrangler Unlimited X 3.8L V6 Tires & Wheels Check Tire Pressure

Properly inflated tires is the easiest way to improve fuel economy. The right tire pressure is NOT on the side of your tire btw

2010 Jeep Wrangler Unlimited X 3.8L V6 Battery Replace

Did you know that heat is worse for your battery than cold? Replace it every 4 years

2010 Jeep Wrangler Unlimited X 3.8L V6 Air Conditioner Recharge Freon

If your car blows hot air when your air conditioner is turned on, try recharging the freon first

2010 Jeep Wrangler Unlimited X 3.8L V6 Brake Fluid Check Fluid Level

Stop! Checking your brake fluid from time to time is a great way to ensure safe stopping

Share on   Share on Twitter   Share on Facebook
Parts & Tools
We may earn a commission from qualifying purchases as an Amazon Associate
Video Description

Learn how to change the oil and oil filter in your 2010 Jeep Wrangler with this free video. What type of oil is required in a Wrangler? You can use synthetic oil in any modern vehicle. Many vehicles will require the use of 100% synthetic oil, others allow synthetic blend, which is a mix of synthetic and conventional oil, and conventional oil too. The synthetic oil vs conventional oil debate has many proponents on both sides. Synthetic oil will not break down over time and tends to have longer change intervals, so if you want to have more time between oil changes, then synthetic oil is a good choice. Conventional oil works well for drivers who change their oil regularly and if it is approved for your Wrangler. The owners manual will indicate if your 2010 Wrangler takes 0W-20, 0W-30, 5W-20, 5W-30 or 10W-30. This video shows the location of the oil drain plug, oil filter, oil fill cap and dipstick in addition to the steps needed to change the oil and filter in your Wrangler. For most Jeeps, you can wrap an old belt around the oil filter and unscrew it by hand. If you can't do this, see our parts page to find a Jeep Wrangler oil filter wrench. If your Wrangler is too low to the ground to access your drain plug and oil filter, be sure to use jack stands and safe jacking procedures before getting under your Wrangler.

We recommend wearing safety glasses whenever you are working under your Wrangler. You never know what could be dripping down from the engine, battery acid, engine coolant, brake fluid, etc. All of these fluids are harmful to your eyes and skin so it is important to protect yourself.

  • Advance Auto coupon for
    20% off entire order: KIOSK20