David Hobbs helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
This video shows you how to fix minor oil leaks in your 2010 Mazda 6 and how to tell if the fluid leaking from your 6 is oil, how to check your oil level and how to fix the oil leak. Low oil levels can wreck your engine, so it is important to be proactive about oil leaks, however small. Oil leaks in the 2010 6s with the 3.7 liter engine are often due to a bad seal in the drain plug - the metal washer in your drain plug can only be tightened a few times before it loses its ability to seal and should be replaced periodically to prevent leaking. Replacing the metal washer should only be done when you change the oil in your 6, fortunately the video above shows how to fix the minor leak in the interim.
Make sure that your engine is cold and that your 6 is parked on a level surface when you check the oil level as both of these things can cause the oil level to read low. Check our What is Leaking? video to see what type of fluid is leaking from your 6 if you need help figuring out what type of oil is leaking from your 6.
If your car is leaking a small amount of power steering fluid - see this video on how to fix the leak2010 Mazda 6 S 3.7L V6
A/C blowing hot air?2010 Mazda 6 S 3.7L V6
Leaking coolant is usually a sign that your water pump needs to be replaced. This video shows you how to quickly plug it2010 Mazda 6 S 3.7L V6
A few key tips will make jacking up your car much safer2010 Mazda 6 S 3.7L V6
Dirty cabin air filter cause undue wear on your car's heater and AC and can cause bad odors2010 Mazda 6 S 3.7L V6