Lake Ford helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
This video shows you how to replace a burnt out rear turn signal on your 2010 Mitsubishi Outlander. We recommend that you change both the driver and passenger side bulbs at the same time on your Outlander as they get dimmer over time and if one is out, then the other one is likely to burn out soon. If the turn signal (also known as a blinker or flasher) blinks rapidly or doesn't blink at all or lights up without blinking when it is turned on, this is your Outlander's way of telling you that the bulb is burnt out. Turn your hazard lights on and check the front of your Outlander and then the back, whichever side is not lighting up is the side with the burnt out bulb.
When changing the turn signal bulb in your Outlander, be careful not to touch the glass portion of the bulb with your fingers as this will cause the bulb to burn out prematurely.
Want an easy way to save $500? Rotate your tires at least three times per year2010 Mitsubishi Outlander ES 2.4L 4 Cyl.
Dirty cabin air filter cause undue wear on your car's heater and AC and can cause bad odors2010 Mitsubishi Outlander ES 2.4L 4 Cyl.
Leaking coolant is usually a sign that your water pump needs to be replaced. This video shows you how to quickly plug it2010 Mitsubishi Outlander ES 2.4L 4 Cyl.
Small bulbs that burn out regularly - did you know you can replace these with LED lights?2010 Mitsubishi Outlander ES 2.4L 4 Cyl.
There's no reason to check the washer fluid level without adding some - see how to do it here!2010 Mitsubishi Outlander ES 2.4L 4 Cyl.