David Hobbs helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
The video above shows you how to add oil to your 2010 Mitsubishi Outlander. Before adding oil to your Outlander, make sure that your engine was cold and that your car was parked on a level surface when you checked the oil level otherwise you won't be able to tell if your Outlander has a low oil level. For most Mitsubishis, if your oil level is at the minimum mark on your dipstick, you should add about a quart of oil. If you are unsure how much oil to add to your Outlander, add a little bit at a time and check your dipstick frequently. This video shows you where the oil fill cap is located on your Outlander and how to add oil. Adding too much oil to your Outlander can be harmful, so it is easiest to add a little at a time.
If you add too much oil to your Outlander, you will need to remove some by loosening the drain plug underneath your engine - check out our video on how to change your oil & oil filter to see how to remove the excess oil.
White light when you back up - yup, they burn out and you can replace them with bright LEDs2010 Mitsubishi Outlander ES 2.4L 4 Cyl.
Your coolant should perform well under any condition - just like Aaron Rodgers!2010 Mitsubishi Outlander ES 2.4L 4 Cyl.
Replacing a dirty air filter can improve gas mileage by up to 4%. Isn't efficiency great?2010 Mitsubishi Outlander ES 2.4L 4 Cyl.
DRLs are on more than your headlights. They burn out faster and should be replaced regularly2010 Mitsubishi Outlander ES 2.4L 4 Cyl.
Don't be caught in the fog with burnt out fog light bulbs2009 Mitsubishi Outlander XLS 3.0L V6