Braeger Ford helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
Jacking up your 2010 Toyota Corolla is can be dangerous if done incorrectly. The video above shows you where the jack and jack kit is located in your Corolla how to assemble the components of the jack kit and safety precautions to take when using your jack. Most Toyota jack kits include the jack, a jack handle and a lug nut wrench. If you have a flat tire in your Toyota Corolla, please see our how do I fix a flat tire video.
While following the instructions provided in your Corolla's owners manual and in this video will help minimize the risk of injury. The best way to avoid injury is to never get under your vehicle while it is jacked up. Remember also, that even if your car is jacked up properly, another car could hit it and knock it over; therefore, be sure to give careful consideration to your environment before raising your car.
On many cars, the high beam bulb runs at reduced power during the day - check 'em and change 'em!2010 Toyota Corolla S 1.8L 4 Cyl.
One of the easiest fluids to top off - learn how to open the hood and where the reservoir is on your car2010 Toyota Corolla S 1.8L 4 Cyl.
Is the clock in your car ahead or behind? Learn how to set it here!2010 Toyota Corolla S 1.8L 4 Cyl.
Transmissions that leak fluid usually have never been flushed and the seal is finally leaking. The right stop leak product can cure a lot2010 Toyota Corolla S 1.8L 4 Cyl.
If your blinker doesn't blink, or blinks rapidly, you likely have a burnt out bulb2010 Toyota Corolla S 1.8L 4 Cyl.
White light when you back up - yup, they burn out and you can replace them with bright LEDs2010 Toyota Corolla S 1.8L 4 Cyl.