How to Jumpstart a 1992-2011 Ford Crown Victoria

1. Getting Started - Prepare for the repair

2. Open the Hood - How to pop the hood and prop it open

3. Access Battery - Learn where the battery is located

4. Jump Points - Locate the positive terminal and the ground

5. Jump Procedure - Correctly hook up the jumper cables and jump

6. Replace Cover - Ensure the cover is put back properly

7. After the Jump - Tips to follow after jumping the dead battery

8. Troubleshoot - If the jump didn't work, try these adjustments

9. More Info. - Additional thoughts on jumping a dead battery

Share on   Share on Twitter   Share on Facebook
Video Description

This video shows you how to jump start a dead battery in your 2011 Ford Crown Victoria. If you get into your Crown Victoria, turn the key, and your car doesn't start (you may hear nothing or a clicking sound from the engine bay), you have a dead battery and need a jump-start. Check to see if you left your headlights or an interior light on and turn the switch off. Assuming that you have a pair of jumper cables, a pair of safety glasses and a friend to give you a jumpstart, the video above will show you where to connect the cables (and in what order!) for your Crown Victoria. Once you are finished reviving a dead car battery in your Crown Victoria, make sure you drive it for at least 5 minutes before turning it off so your battery isn't dead the next time.

So what's up with the safety glasses? There is a small possibility of a battery exploding during the charging process if you don't connect the cables properly (causing a spark) and there is a bunch of hydrogen gas around the battery (car batteries emit hydrogen gas when they discharge) - this is much more of an issue with cars that haven't been driven for a long time than if you drive your Crown Victoria regularly and simply forgot to turn your lights off.

  • Advance Auto coupon for
    20% off entire order: KIOSK20
Author

Hans Angermeier has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road.

2011 Ford Crown Victoria LX 4.6L V8 FlexFuel Transmission Fluid Fix Leaks

Transmissions that leak fluid usually have never been flushed and the seal is finally leaking. The right stop leak product can cure a lot

2011 Ford Crown Victoria LX 4.6L V8 FlexFuel Power Steering Fluid Fix Leaks

If your car is leaking a small amount of power steering fluid - see this video on how to fix the leak

2011 Ford Crown Victoria LX 4.6L V8 FlexFuel Hoses Check Hoses

Coolant hoses wear out over time and need to be replaced - check 'em early and often

2011 Ford Crown Victoria LX 4.6L V8 FlexFuel Lights Brake Light (replace bulb)

Burnt out brake lights increase your chance of getting rear ended - check and change yours today