David Hobbs helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
Checking the engine coolant (also known as antifreeze) level in your 2011 Ford Crown Victoria is pretty easy. In order to get an accurate reading, your 4.6 liter engine should be cool to the touch when you check it. Engine coolant circulates through your engine to keep it cool in the summer but won't freeze in the winter. The video above shows you where the coolant reservoir in your Crown Victoria is located and how to check the coolant level. If you need to add anti-freeze, be sure to check your owners manual to determine the correct type of coolant to add - in Fords, it usually located in a section titled Fluid Capacities towards the end of your manual. See our video on how to add engine coolant for tips on adding coolant to your Crown Victoria.
Always wear safety goggles when working on your Crown Victoria. Taking off the coolant reservoir cap on a warm engine could cause the cap to up explosively and fluid to spray out of the reservoir. If you notice an oily surface in your coolant, immediately have your mechanic inspect your Crown Victoria for head gasket leakage.
There's no reason to check the washer fluid level without adding some - see how to do it here!2011 Ford Crown Victoria LX 4.6L V8 FlexFuel
The burnt out tail light: classic reason for a cop to pull you over - change yours now2011 Ford Crown Victoria LX 4.6L V8 FlexFuel
Transmissions that leak fluid usually have never been flushed and the seal is finally leaking. The right stop leak product can cure a lot2011 Ford Crown Victoria LX 4.6L V8 FlexFuel
Cars burn, leak and otherwise dispense of their oil. Check your level frequently and top up when necessary2011 Ford Crown Victoria LX 4.6L V8 FlexFuel
Is the clock in your car ahead or behind? Learn how to set it here!2011 Ford Crown Victoria LX 4.6L V8 FlexFuel