Lake Chevy helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
In the video above, we show you how to fix minor oil leaks in your 2011 Ford Crown Victoria. We will show you specifically how to determine if the fluid leaking from your Crown Victoria is oil, check your oil level and fix the oil leak using stop leak. Extremely low oil levels can critically damage your engine, so it is important to be proactive about oil leaks, however small. Oil leaks in the 2011 Crown Victorias with the 4.6 liter engine are often due to a bad seal in the drain plug - the metal washer in your drain plug can only be tightened a few times before it loses its ability to seal and should be replaced periodically to prevent leaking. Replacing the metal washer should only be done when you change the oil in your Crown Victoria, fortunately the video above shows how to fix the minor leak in the interim.
Fixing minor oil leaks is fairly straightforward, but first, make sure that your engine is cold and that your Crown Victoria is parked on a level surface when you check the oil level as both of these things can cause the oil level to read low. Check our What is Leaking? video to see what type of fluid is leaking from your Crown Victoria if you are unsure.
White light when you back up - yup, they burn out and you can replace them with bright LEDs2011 Ford Crown Victoria LX 4.6L V8 FlexFuel
Learn where your spare tire and jack are located before you need it on the side of the road2011 Ford Crown Victoria LX 4.6L V8 FlexFuel
DRLs are on more than your headlights. They burn out faster and should be replaced regularly2011 Ford Crown Victoria LX 4.6L V8 FlexFuel
Don't send mixed signals - if your turn signal doesn't blink, or blinks rapidly, you likely have a burnt out bulb2011 Ford Crown Victoria LX 4.6L V8 FlexFuel
Coolant hoses wear out over time and need to be replaced - check 'em early and often2011 Ford Crown Victoria LX 4.6L V8 FlexFuel