Braeger Chevy helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
The video above shows you how to change a burnt out front turn signal bulb on your 2011 Honda CR-Z. If the turn signal (also known as a blinker or flasher) blinks rapidly or doesn't blink at all / stays stuck when engaged, this is your CR-Z's way of telling you that a turn signal bulb is burnt out. Troubleshooting for burnt out turn signal bulbs in your CR-Z is relatively easy - turn your hazard lights on and check the front of your CR-Z and then the back, whichever side is not illuminating is the side with the burnt out bulb. We recommend that you change both the driver and passenger side bulbs at the same time as they get dimmer over time and if one is out, then the other one is likely to burn out soon.
When changing the turn signal bulb in your CR-Z, be careful not to touch the glass portion of the bulb with your fingers as this will cause the bulb to burn out prematurely.
DRLs are on more than your headlights. They burn out faster and should be replaced regularly2011 Honda CR-Z EX 1.5L 4 Cyl.
The burnt out tail light: classic reason for a cop to pull you over - change yours now2011 Honda CR-Z EX 1.5L 4 Cyl.
Carmakers are hiding interior fuse boxes all over the place these days - see how to check your interior fuses here!2011 Honda CR-Z EX 1.5L 4 Cyl.
Transmissions that leak fluid usually have never been flushed and the seal is finally leaking. The right stop leak product can cure a lot2011 Honda CR-Z EX 1.5L 4 Cyl.
On many cars, the high beam bulb runs at reduced power during the day - check 'em and change 'em!2011 Honda CR-Z EX 1.5L 4 Cyl.
Is the clock in your car ahead or behind? Learn how to set it here!2011 Honda CR-Z EX 1.5L 4 Cyl.