Check Power Steering Level: 2011 Mitsubishi Endeavor LS 3.8L V6

Mitsubishi Endeavor Model Years - 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011

1. Getting Started - Prepare for the repair

2. Open the Hood - How to pop the hood and prop it open

3. Find Reservoir - Locate the power steering fluid reservoir

4. Check Level - Determine the power steering fluid level

5. Checking Tips - Tips on reading the power steering fluid levels

6. Replace Cap - Secure the power steering fluid cap back in place

7. More Info. - Additional information on power steering fluid

Author

Hans Angermeier is an ASE certified Maintenance and Light Repair Technician and has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road. Over the past 10 years, Hans has been focused on building CarCareKiosk, which is visited by millions of drivers each month.

Share on   Share on Twitter   Share on Facebook
Parts & Tools
We may earn a commission from qualifying purchases as an Amazon Associate
Video Description

The video above shows you the steps needed to check the power steering fluid level in your 2011 Mitsubishi Endeavor. Checking the power steering fluid level in your Endeavor is relatively easy and should be done once a month or if you are experienced difficulty turning the wheel or steering your Endeavor. Your Endeavor should be parked on a level surface and your 3.8 liter engine should be cold to the touch.

If the power steering fluid level in your Endeavor is low, fill it up to the maximum line with power steering fluid and check it again in a week to determine if you have a leak. The power steering fluid reservoir will typically have a symbol of a steering wheel on the cap. Likewise, if your Endeavor has electric power steering, you may see a steering wheel picture with an explanation point next to it on your dashboard to indicate power steering problems.

  • Advance Auto coupon for
    20% off entire order: KIOSK20
2011 Mitsubishi Endeavor LS 3.8L V6 Coolant (Antifreeze) Fix Leaks

Leaking coolant is usually a sign that your water pump needs to be replaced. This video shows you how to quickly plug it

2011 Mitsubishi Endeavor LS 3.8L V6 Transmission Fluid Add Fluid

If your transmission is running low on fluid, be sure to add some - find out how to do this here!

2011 Mitsubishi Endeavor LS 3.8L V6 Tires & Wheels Change a Flat Tire

Learn where your spare tire and jack are located before you need it on the side of the road

2011 Mitsubishi Endeavor LS 3.8L V6 Windshield Wiper Blade (Front) Replace Wiper Blades

Did you know that the sun wears out wiper blades faster than rain? Replace your blades twice a year