1. Getting Started - Prepare for the repair
2. Open the Hood - How to pop the hood and prop it open
3. Remove Dipstick - Access point for transmission fluid
4. Add Fluid - Determine correct fluid type and add fluid
5. Replace Dipstick - Put the dipstick / cap back in place
6. More Info. - Additional information on adding trans. fluid
This video shows you how to add transmission fluid to your 2012 Cadillac SRX. Before adding transmission fluid, make sure that your engine was running when you checked the fluid level. If the transmission fluid level on your SRX is low, you need to add fluid through the dipstick tube. Cadillac has been developed sophisticated transmissions through years and it is critical that you add the exact type of transmission fluid stipulated by your owner's manual (typically in the back of the manual in a section titled Fluid Capacities.) When adding transmission fluid to your SRX, be sure to add it slowly as the transmission fluid capacity is reached quickly and it is difficult to remove excess fluid if you overfill.
If you are having problems with the transmission in your SRX, such as clunky shifting or hesitation, check the fluid level first - it is amazing how many drivers pay thousands of dollars for transmission work when a half quart of transmission fluid would have fixed the problem.
Hans Angermeier has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road.
Don't be the guy with your third brake light burnt out
A few key tips will make jacking up your car much safer
If your brake fluid is a little low, learn how to add some here. Ignoring a low level leads to big problems
Transmissions that leak fluid usually have never been flushed and the seal is finally leaking. The right stop leak product can cure a lot