Intl. Autos helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
Checking the engine coolant (also known as antifreeze) level in your 2012 Chrysler 200 is pretty easy. In order to get an accurate reading, your 2.4 liter engine should be cool to the touch when you check it. Engine coolant circulates through your engine to keep it cool in the summer but won't freeze in the winter. The video above shows you where the coolant reservoir in your 200 is located and how to check the coolant level. If you need to add anti-freeze, be sure to check your owners manual to determine the correct type of coolant to add - in Chryslers, it usually located in a section titled Fluid Capacities towards the end of your manual. See our video on how to add engine coolant for tips on adding coolant to your 200.
Always wear safety goggles when working on your 200. Taking off the coolant reservoir cap on a warm engine could cause the cap to up explosively and fluid to spray out of the reservoir. If you notice an oily surface in your coolant, immediately have your mechanic inspect your 200 for head gasket leakage.
Flushing the coolant in your car is not that hard and will extend the life of your engine tremendously - learn how here!2012 Chrysler 200 LX 2.4L 4 Cyl. Sedan (4 Door)
Stop! Checking your brake fluid from time to time is a great way to ensure safe stopping2012 Chrysler 200 LX 2.4L 4 Cyl. Sedan (4 Door)
Learn where your air filter is located and how to determine if it needs to be changed.2012 Chrysler 200 LX 2.4L 4 Cyl. Sedan (4 Door)
Avoid tickets and accidents with both working headlights! New bulbs are much brighter too2012 Chrysler 200 LX 2.4L 4 Cyl. Sedan (4 Door)
Did you know that heat is worse for your battery than cold? Replace it every 4 years2012 Chrysler 200 LX 2.4L 4 Cyl. Sedan (4 Door)