Honda City helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
The video above shows you how to add oil to your 2012 Chrysler 200. Before adding oil to your 200, make sure that your engine was cold and that your car was parked on a level surface when you checked the oil level otherwise you won't be able to tell if your 200 has a low oil level. For most Chryslers, if your oil level is at the minimum mark on your dipstick, you should add about a quart of oil. If you are unsure how much oil to add to your 200, add a little bit at a time and check your dipstick frequently. This video shows you where the oil fill cap is located on your 200 and how to add oil. Adding too much oil to your 200 can be harmful, so it is easiest to add a little at a time.
If you add too much oil to your 200, you will need to remove some by loosening the drain plug underneath your engine - check out our video on how to change your oil & oil filter to see how to remove the excess oil.
Properly inflated tires is the easiest way to improve fuel economy. The right tire pressure is NOT on the side of your tire btw2012 Chrysler 200 LX 2.4L 4 Cyl. Sedan (4 Door)
Don't be caught in the fog with burnt out fog light bulbs2013 Chrysler 200 Limited 3.6L V6 FlexFuel Sedan
Minor transmission fluid leaks can often be fixed with the right sealant - see how to do this2012 Chrysler 200 LX 2.4L 4 Cyl. Sedan (4 Door)
Low coolant levels is all to common - top yours up today2012 Chrysler 200 LX 2.4L 4 Cyl. Sedan (4 Door)
Replacing a dirty air filter can improve gas mileage by up to 4%. Isn't efficiency great?2012 Chrysler 200 LX 2.4L 4 Cyl. Sedan (4 Door)