Transmission Fluid Level Check 2012 Chrysler 300 Limited 3.6L V6

Chrysler 300 Model Years - 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019

How to check the ATF fluid / Transmission oil level

Car Displayed: 2013 Dodge Charger SE 3.6L V6 FlexFuel info

Author

Hans Angermeier is an ASE certified Maintenance and Light Repair Technician and has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road. Over the past 10 years, Hans has been focused on building CarCareKiosk, which is visited by millions of drivers each month.

2012 Chrysler 300 Limited 3.6L V6 Fuse (Interior) Check

Carmakers are hiding interior fuse boxes all over the place these days - see how to check your interior fuses here!

2012 Chrysler 300 Limited 3.6L V6 Lights Tail Light (replace bulb)

The burnt out tail light: classic reason for a cop to pull you over - change yours now

2012 Chrysler 300 Limited 3.6L V6 Battery Replace

Did you know that heat is worse for your battery than cold? Replace it every 4 years

2012 Chrysler 300 Limited 3.6L V6 Coolant (Antifreeze) Fix Leaks

Leaking coolant is usually a sign that your water pump needs to be replaced. This video shows you how to quickly plug it

Share on   Share on Twitter   Share on Facebook
Parts & Tools
We may earn a commission from qualifying purchases as an Amazon Associate
Video Description

The engine in your 2012 Chrysler 300 should be running when you perform a transmission fluid level check, otherwise it will be inaccurate. The video above shows where the transmission fluid dipstick or the transmission fluid check plug is located in your 300 and how to check the transmission fluid level. Your 300 will have either a transmission dipstick or a check or fill plug to perform a transmission fluid check. The transmission dipstick will typically be in the engine bay or on top or even the side of your 300 transmission. The transmission check plug will typically be on the bottom or the side of the transmission and may also be next to the axle. If the transmission fluid level in your 300 is low, you need to add transmission fluid through the dipstick tube or the check plug hole. When adding transmission fluid to your 300, be sure to add it slowly as it will fill up quickly and is difficult to remove excess fluid if you overfill.

If you are having problems with the transmission in your 300, such as clunky shifting or hesitation, check the fluid level first - it is amazing how many drivers pay thousands of dollars for transmission work when a half quart of transmission fluid would have fixed the problem.

  • Advance Auto coupon for
    20% off entire order: KIOSK20