1. Getting Started - Prepare for the repair
2. Open the Hood - How to pop the hood and prop it open
3. Remove Dipstick - Access point for transmission fluid
4. Check Level - Insert dipstick and pull it out to determine level
5. Add Fluid - Determine correct fluid type and add fluid
6. Replace Dipstick - Put the dipstick / cap back in place
7. More Info. - Additional information on checking trans. fluid levels
The engine in your 2012 Ford F-150 should be running when you perform a transmission fluid level check, otherwise it will be inaccurate. The video above shows where the transmission fluid dipstick is located in your F-150 and how to check the transmission fluid level. If the transmission fluid level in your F-150 is low, you need to add transmission fluid through the dipstick tube. When adding transmission fluid to your F-150, be sure to add it slowly as it will fill up quickly and is difficult to remove excess fluid if you overfill.
If you are having problems with the transmission in your F-150, such as clunky shifting or hesitation, check the fluid level first - it is amazing how many drivers pay thousands of dollars for transmission work when a half quart of transmission fluid would have fixed the problem.
Hans Angermeier is an ASE certified Maintenance and Light Repair Technician and has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road. Over the past 10 years, Hans has been focused on building CarCareKiosk, which is visited by millions of drivers each month.
Don't be the guy with your third brake light burnt out
Did you know that heat is worse for your battery than cold? Replace it every 4 years
Coolant hoses wear out over time and need to be replaced - check 'em early and often