How to Add Refrigerant to a 2012 Ford Mustang GT 5.0L V8 Coupe

Ford Mustang Model Years - 2010, 2011, 2012, 2013, 2014

Where the low pressure A/C port is on 2012 Mustang and how to add add freon

Author

Hans Angermeier is an ASE certified Maintenance and Light Repair Technician and has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road. Over the past 10 years, Hans has been focused on building CarCareKiosk, which is visited by millions of drivers each month.

2012 Ford Mustang GT 5.0L V8 Coupe Battery Clean Battery & Terminals

If your battery has green or white cruddy deposits, it is probably not getting enough juice from and will likely wear out sooner

2012 Ford Mustang GT 5.0L V8 Coupe Fuse (Engine) Replace

If you have an electrical component that doesn't work, try replacing the fuse first

2012 Ford Mustang GT 5.0L V8 Coupe Battery Replace

Did you know that heat is worse for your battery than cold? Replace it every 4 years

2012 Ford Mustang GT 5.0L V8 Coupe Lights Reverse Light (replace bulb)

White light when you back up - yup, they burn out and you can replace them with bright LEDs

Share on   Share on Twitter   Share on Facebook
Parts & Tools
We may earn a commission from qualifying purchases as an Amazon Associate
Video Description

When the air conditioner in your 2012 Ford Mustang starts blowing hot air, you likely have a freon leak. Recharging the freon in your AC system is an inexpensive and easy first step to restoring the cooling capacity of your A/C system. Most refrigerants include a leak sealer that will seal small leaks in addition to filling the R134a freon. The A/C system in your Mustang consists of a compressor that is belt-driven, an evaporator and freon. If there is a problem with your compressor or evaporator, adding freon will not restore cooling.

How do you recharge AC in a 2012 Ford Mustang? The low side AC port location is the first thing to find when you are looking for how to put freon in a car. Once you find the 2012 Mustang AC low pressure port cap, hook up the can of refrigerant to the low pressure port. When your compressor kicks on, add freon to the correct pressure. In addition to cooling, freon lubricates the compressor when it runs. Typically the AC recharge kit you buy will have enough capacity to add enough freon to get the AC in your Mustang to blow cold air.

What type of refrigerant does a 2012 Ford Mustang use? Air conditioning systems can vary so it is critical that you check the sticker in the engine bay to determine your Mustang refrigerant type. There is an AC sticker in the engine bay of your 2012 Mustang that indicates if it requires R134a refrigerant or the newer R1234YF type to do a recharge. You cannot add R1234YF refrigerant to a R134a system nor can you add R134a refrigerant to a R1234YF system. R134a and R1234YF have different low pressure port types, so you should never use a recharge adapter to add the wrong type of refrigerant. Recharging your Mustang with the wrong type of freon can make the AC recharge cost much higher!

  • Advance Auto coupon for
    20% off entire order: KIOSK20