David Hobbs helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
This video shows you how to open the hood in your 2012 Mitsubishi Lancer. Popping the hood on your Lancer is a two step process, you need to release the hood latch inside your Lancer and then you need to release the safety latch under your hood in the front of your Lancer. The video above shows you the location of both hood latches. Sometimes, the hood on Mitsubishis gets stuck and won't pop up after the interior latch is released. If this occurs on your Lancer, simply pull up on the hood and it should pop up for you to release the second latch. Sometimes, especially on older Lancers, you may have difficulty getting your hood to latch when you close it. In this case, the interior release lever on your 2012 Mitsubishi Lancer is probably stuck in the "open" position - push the release lever back and forth several times and then try to close your hood.
Flushing the coolant in your car is not that hard and will extend the life of your engine tremendously - learn how here!2012 Mitsubishi Lancer SE 2.4L 4 Cyl.
The burnt out tail light: classic reason for a cop to pull you over - change yours now2012 Mitsubishi Lancer SE 2.4L 4 Cyl.
If your brake fluid is a little low, learn how to add some here. Ignoring a low level leads to big problems2012 Mitsubishi Lancer SE 2.4L 4 Cyl.
See how to seal up minor power steering fluid leaks2012 Mitsubishi Lancer SE 2.4L 4 Cyl.
Replacing a dirty air filter can improve gas mileage by up to 4%. Isn't efficiency great?2012 Mitsubishi Lancer SE 2.4L 4 Cyl.
Dirty cabin air filter cause undue wear on your car's heater and AC and can cause bad odors2012 Mitsubishi Lancer SE 2.4L 4 Cyl.