EN
Parts & Tools Parts & Tools
Mechanics Mechanics
Gear Guide Gear Guide
search

Front Turn Signal Change Mitsubishi Lancer (2008-2017)

Reina helped make these videos

Have you purchased the bulbs you plan to install?

We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.

 
Video Description

The video above shows you how to change a burnt out front turn signal bulb on your 2012 Mitsubishi Lancer. If the turn signal (also known as a blinker or flasher) blinks rapidly or doesn't blink at all / stays stuck when engaged, this is your Lancer's way of telling you that a turn signal bulb is burnt out. Troubleshooting for burnt out turn signal bulbs in your Lancer is relatively easy - turn your hazard lights on and check the front of your Lancer and then the back, whichever side is not illuminating is the side with the burnt out bulb. We recommend that you change both the driver and passenger side bulbs at the same time as they get dimmer over time and if one is out, then the other one is likely to burn out soon.

When changing the turn signal bulb in your Lancer, be careful not to touch the glass portion of the bulb with your fingers as this will cause the bulb to burn out prematurely.

Other videos you might find helpful

  • 2012 Mitsubishi Lancer SE 2.4L 4 Cyl. Fuse (Engine) Replace
    Change an engine fuse

    If you have an electrical component that doesn't work, try replacing the fuse first

    2012 Mitsubishi Lancer SE 2.4L 4 Cyl.
  • 2012 Mitsubishi Lancer SE 2.4L 4 Cyl. Battery Clean Battery & Terminals
    Clean the gunk off of your battery

    If your battery has green or white cruddy deposits, it is probably not getting enough juice from and will likely wear out sooner

    2012 Mitsubishi Lancer SE 2.4L 4 Cyl.
  • 2012 Mitsubishi Lancer SE 2.4L 4 Cyl. Air Filter (Cabin) Replace
    Change your cabin air filter!

    Dirty cabin air filter cause undue wear on your car's heater and AC and can cause bad odors

    2012 Mitsubishi Lancer SE 2.4L 4 Cyl.
  • 2012 Mitsubishi Lancer SE 2.4L 4 Cyl. Fuse (Engine) Check
    Check for a blown engine fuse

    Odd electrical problems that come out of nowhere can often signify a blown engine fuse - check and change yours here!

    2012 Mitsubishi Lancer SE 2.4L 4 Cyl.
  • 2012 Mitsubishi Lancer SE 2.4L 4 Cyl. Lights Tail Light (replace bulb)
    Change a tail light

    The burnt out tail light: classic reason for a cop to pull you over - change yours now

    2012 Mitsubishi Lancer SE 2.4L 4 Cyl.
  • 2012 Mitsubishi Lancer SE 2.4L 4 Cyl. Brake Fluid Add Fluid
    Add brake fluid

    If your brake fluid is a little low, learn how to add some here. Ignoring a low level leads to big problems

    2012 Mitsubishi Lancer SE 2.4L 4 Cyl.
  • See all videos for the 2012 Mitsubishi Lancer
Comments
The Right Parts
The Right Tools