Lake Ford helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
The video above shows you how to add oil to your 2012 Mitsubishi Lancer. Before adding oil to your Lancer, make sure that your engine was cold and that your car was parked on a level surface when you checked the oil level otherwise you won't be able to tell if your Lancer has a low oil level. For most Mitsubishis, if your oil level is at the minimum mark on your dipstick, you should add about a quart of oil. If you are unsure how much oil to add to your Lancer, add a little bit at a time and check your dipstick frequently. This video shows you where the oil fill cap is located on your Lancer and how to add oil. Adding too much oil to your Lancer can be harmful, so it is easiest to add a little at a time.
If you add too much oil to your Lancer, you will need to remove some by loosening the drain plug underneath your engine - check out our video on how to change your oil & oil filter to see how to remove the excess oil.
Coolant hoses wear out over time and need to be replaced - check 'em early and often2012 Mitsubishi Lancer SE 2.4L 4 Cyl.
There's no reason to check the washer fluid level without adding some - see how to do it here!2012 Mitsubishi Lancer SE 2.4L 4 Cyl.
Got a short fuse? Don't blow a fuse, change it!2012 Mitsubishi Lancer SE 2.4L 4 Cyl.
Low coolant levels is all to common - top yours up today2012 Mitsubishi Lancer SE 2.4L 4 Cyl.
Your coolant should perform well under any condition - just like Aaron Rodgers!2012 Mitsubishi Lancer SE 2.4L 4 Cyl.
Properly inflated tires is the easiest way to improve fuel economy. The right tire pressure is NOT on the side of your tire btw2012 Mitsubishi Lancer SE 2.4L 4 Cyl.