Braeger Chevy helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
The video above shows you how to add oil to your 2012 Toyota Camry. Before adding oil to your Camry, make sure that your engine was cold and that your car was parked on a level surface when you checked the oil level otherwise you won't be able to tell if your Camry has a low oil level. For most Toyotas, if your oil level is at the minimum mark on your dipstick, you should add about a quart of oil. If you are unsure how much oil to add to your Camry, add a little bit at a time and check your dipstick frequently. This video shows you where the oil fill cap is located on your Camry and how to add oil. Adding too much oil to your Camry can be harmful, so it is easiest to add a little at a time.
If you add too much oil to your Camry, you will need to remove some by loosening the drain plug underneath your engine - check out our video on how to change your oil & oil filter to see how to remove the excess oil.
Coolant hoses wear out over time and need to be replaced - check 'em early and often2012 Toyota Camry LE 2.5L 4 Cyl.
Your coolant should perform well under any condition - just like Aaron Rodgers!2012 Toyota Camry LE 2.5L 4 Cyl.
If your blinker doesn't blink, or blinks rapidly, you likely have a burnt out bulb2012 Toyota Camry LE 2.5L 4 Cyl.
Don't send mixed signals - if your turn signal doesn't blink, or blinks rapidly, you likely have a burnt out bulb2012 Toyota Camry LE 2.5L 4 Cyl.
White light when you back up - yup, they burn out and you can replace them with bright LEDs2012 Toyota Camry LE 2.5L 4 Cyl.
Stop! Checking your brake fluid from time to time is a great way to ensure safe stopping2012 Toyota Camry LE 2.5L 4 Cyl.