1. Getting Started - Prepare for the repair
2. Open the Hood - How to pop the hood and prop it open
3. Find Reservoir - Locate the brake fluid reservoir and clean it
4. Check Level - Determine the brake fluid level
5. Add Fluid - Determine brake fluid type and add fluid properly
6. Replace Cap - Secure the brake fluid cap onto the reservoir
7. More Info. - Additional thoughts on adding brake fluid
Checking the brake fluid in your 2012 Toyota Corolla is easy and should be done once a month. On some Toyotas, the owners manual suggests pumping the brake pedal 25 times before looking at the fluid level, be sure to check your owners manual to see if this applies to your 2012 Corolla. In addition to checking the brake fluid level, you want to look at the color of the brake fluid in your Corolla - if it is dark in color or it has been more than 2 years since you have changed it, you should consider having it changed - this will help make the internal components (which are expensive) last much longer.
If you need to add fluid to your Corolla, it is important to check your owners manual for the correct type to add - it likely be either DOT 3, DOT 4 or DOT 5, also known as silicone brake fluid. Be sure to discard bottles of brake fluid that are over a year old - brake fluid sucks the moisture out of the air and the water vapor in the fluid can quickly rust out the brake lines in your Corolla.
Hans Angermeier has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road.
Animals love the sweet smell of antifreeze, too bad it's toxic! Fix your minor leaks
Don't be the guy with your third brake light burnt out
On many cars, the high beam bulb runs at reduced power during the day - check 'em and change 'em!
Learn where your spare tire and jack are located before you need it on the side of the road