Stroli Motors helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
This video shows you how to replace a burnt out rear turn signal on your 2013 Chevrolet Impala. We recommend that you change both the driver and passenger side bulbs at the same time on your Impala as they get dimmer over time and if one is out, then the other one is likely to burn out soon. If the turn signal (also known as a blinker or flasher) blinks rapidly or doesn't blink at all or lights up without blinking when it is turned on, this is your Impala's way of telling you that the bulb is burnt out. Turn your hazard lights on and check the front of your Impala and then the back, whichever side is not lighting up is the side with the burnt out bulb.
When changing the turn signal bulb in your Impala, be careful not to touch the glass portion of the bulb with your fingers as this will cause the bulb to burn out prematurely.
If your transmission is running low on fluid, be sure to add some - find out how to do this here!2013 Chevrolet Impala LT 3.6L V6 FlexFuel
Do you ever get into your friend's car and notice a bad smell? A dirty cabin air filter could be the culprit2013 Chevrolet Impala LT 3.6L V6 FlexFuel
Stop! Checking your brake fluid from time to time is a great way to ensure safe stopping2013 Chevrolet Impala LT 3.6L V6 FlexFuel
One of the easiest fluids to top off - learn how to open the hood and where the reservoir is on your car2013 Chevrolet Impala LT 3.6L V6 FlexFuel
Replacing a dirty air filter can improve gas mileage by up to 4%. Isn't efficiency great?2013 Chevrolet Impala LT 3.6L V6 FlexFuel
DRLs are on more than your headlights. They burn out faster and should be replaced regularly2013 Chevrolet Impala LT 3.6L V6 FlexFuel