1. Getting Started - Prepare for the repair
2. Open the Hood - How to pop the hood and prop it open
3. Remove Bulb - Steps to remove a burnt out bulb
4. Helpful Hints - How to find replacement bulb type and other hints
5. Replace Bulb - Procedures to replace the new bulb
6. More Info. - Additional information on front signal bulbs
The video above shows you how to change a burnt out front turn signal bulb on your 2013 Chevrolet Tahoe. If the turn signal (also known as a blinker or flasher) blinks rapidly or doesn't blink at all / stays stuck when engaged, this is your Tahoe's way of telling you that a turn signal bulb is burnt out. Troubleshooting for burnt out turn signal bulbs in your Tahoe is relatively easy - turn your hazard lights on and check the front of your Tahoe and then the back, whichever side is not illuminating is the side with the burnt out bulb. We recommend that you change both the driver and passenger side bulbs at the same time as they get dimmer over time and if one is out, then the other one is likely to burn out soon.
When changing the turn signal bulb in your Tahoe, be careful not to touch the glass portion of the bulb with your fingers as this will cause the bulb to burn out prematurely.
Hans Angermeier has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road.
If your battery has green or white cruddy deposits, it is probably not getting enough juice from and will likely wear out sooner
If you are leaking oil and parking on your oil spots each night, the oil is breaking down your tires' rubber
Learn where your spare tire and jack are located before you need it on the side of the road
If your transmission is running low on fluid, be sure to add some - find out how to do this here!