Rosen Nissan helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
Checking the oil in a 200 is fairly easy and should be done once a month. Note that most Chrysler have an oil pressure gauge next to the speedometer - this gauge does not tell you what your oil level is, however the video above will show you how check the oil level in your 2013 Chrysler 200. Make sure your engine is cold when you check the oil in your 200. Otherwise the dipstick will read slightly low. In addition to checking the oil level, you also want to look at the condition of the oil when you have the dipstick out. If the oil in your 200 is dirty or smells like gasoline, you probably need an oil change.
If you notice that the oil level in your 200 is extremely low or empty, fill it up and check it again the next time you drive. If it is extremely low again, have your mechanic take a look before driving it much more.
White light when you back up - yup, they burn out and you can replace them with bright LEDs2013 Chrysler 200 Limited 3.6L V6 FlexFuel Sedan
There's no reason to check the washer fluid level without adding some - see how to do it here!2013 Chrysler 200 Limited 3.6L V6 FlexFuel Sedan
On many cars, the high beam bulb runs at reduced power during the day - check 'em and change 'em!2013 Chrysler 200 Limited 3.6L V6 FlexFuel Sedan
If you are leaking oil and parking on your oil spots each night, the oil is breaking down your tires' rubber2013 Chrysler 200 Limited 3.6L V6 FlexFuel Sedan
Got a short fuse? Don't blow a fuse, change it!2013 Chrysler 200 Limited 3.6L V6 FlexFuel Sedan