Lake Ford helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
The video above shows you how to change a burnt out front turn signal bulb on your 2013 Chrysler Town and Country. If the turn signal (also known as a blinker or flasher) blinks rapidly or doesn't blink at all / stays stuck when engaged, this is your Town and Country's way of telling you that a turn signal bulb is burnt out. Troubleshooting for burnt out turn signal bulbs in your Town and Country is relatively easy - turn your hazard lights on and check the front of your Town and Country and then the back, whichever side is not illuminating is the side with the burnt out bulb. We recommend that you change both the driver and passenger side bulbs at the same time as they get dimmer over time and if one is out, then the other one is likely to burn out soon.
When changing the turn signal bulb in your Town and Country, be careful not to touch the glass portion of the bulb with your fingers as this will cause the bulb to burn out prematurely.
The rear wiper that you forgot you had until it streaks horrifically on a rainy day? Change it now!2013 Chrysler Town and Country Touring 3.6L V6 FlexFuel
If you have an electrical component that doesn't work, try replacing the fuse first2013 Chrysler Town and Country Touring 3.6L V6 FlexFuel
Flushing the coolant in your car is not that hard and will extend the life of your engine tremendously - learn how here!2013 Chrysler Town and Country Touring 3.6L V6 FlexFuel
Don't be caught in the fog with burnt out fog light bulbs2013 Chrysler Town and Country Touring 3.6L V6 FlexFuel
Many cars will burn or leak a little bit of oil. Over time, this adds up and you might need to add some - learn how to here!2013 Chrysler Town and Country Touring 3.6L V6 FlexFuel