Reina helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
The video above shows you how to add oil to your 2013 Chrysler Town and Country. Before adding oil to your Town and Country, make sure that your engine was cold and that your car was parked on a level surface when you checked the oil level otherwise you won't be able to tell if your Town and Country has a low oil level. For most Chryslers, if your oil level is at the minimum mark on your dipstick, you should add about a quart of oil. If you are unsure how much oil to add to your Town and Country, add a little bit at a time and check your dipstick frequently. This video shows you where the oil fill cap is located on your Town and Country and how to add oil. Adding too much oil to your Town and Country can be harmful, so it is easiest to add a little at a time.
If you add too much oil to your Town and Country, you will need to remove some by loosening the drain plug underneath your engine - check out our video on how to change your oil & oil filter to see how to remove the excess oil.
Cars burn, leak and otherwise dispense of their oil. Check your level frequently and top up when necessary2013 Chrysler Town and Country Touring 3.6L V6 FlexFuel
Learn where your spare tire and jack are located before you need it on the side of the road2013 Chrysler Town and Country Touring 3.6L V6 FlexFuel
Got a short fuse? Don't blow a fuse, change it!2013 Chrysler Town and Country Touring 3.6L V6 FlexFuel
A/C blowing hot air?2013 Chrysler Town and Country Touring 3.6L V6 FlexFuel
Learn where your air filter is located and how to determine if it needs to be changed.2013 Chrysler Town and Country Touring 3.6L V6 FlexFuel
You love your kids right? See how to properly secure their car seat.2010 Dodge Grand Caravan SE 3.3L V6 FlexFuel