How to Add Refrigerant to a 2013 Ford Edge SE 2.0L 4 Cyl. Turbo

Ford Edge Model Years - 2011, 2012, 2013, 2014

1. Getting Started - Prepare for AC recharge

2. Open the Hood - How to pop the hood and prop it open

3. Locate AC Port - How to access the AC low pressure port and low pressure port cap

4. Air Conditioning Recharge - Safely add freon to your AC system

5. Replace Cap - Replace the AC low pressure port cap

6. More Info. - Additional thoughts on recharging your A/C system

Share on   Share on Twitter   Share on Facebook
Parts & Tools
Video Description

When the air conditioner in your 2013 Ford Edge starts blowing hot air, you likely have a freon leak. Recharging the freon in your AC system is an inexpensive and easy first step to restoring the cooling capacity of your A/C system. Most refrigerants include a leak sealer that will seal small leaks in addition to filling the R134a freon. The A/C system in your Edge consists of a compressor that is belt-driven, an evaporator and freon. If there is a problem with your compressor or evaporator, adding freon will not restore cooling.

How do you recharge AC in a 2013 Ford Edge? The low side AC port location is the first thing to find when you are looking for how to put freon in a car. Once you find the 2013 Edge AC low pressure port cap, hook up the can of refrigerant to the low pressure port. When your compressor kicks on, add freon to the correct pressure. In addition to cooling, freon lubricates the compressor when it runs. Typically the AC recharge kit you buy will have enough capacity to add enough freon to get the AC in your Edge to blow cold air.

What type of refrigerant does a 2013 Ford Edge use? Air conditioning systems can vary so it is critical that you check the sticker in the engine bay to determine your Edge refrigerant type. There is an AC sticker in the engine bay of your 2013 Edge that indicates if it requires R134a refrigerant or the newer R1234YF type to do a recharge. You cannot add R1234YF refrigerant to a R134a system nor can you add R134a refrigerant to a R1234YF system. R134a and R1234YF have different low pressure port types, so you should never use a recharge adapter to add the wrong type of refrigerant. Recharging your Edge with the wrong type of freon can make the AC recharge cost much higher!

  • Advance Auto coupon for
    20% off entire order: KIOSK20

Author

Hans Angermeier is an ASE certified Maintenance and Light Repair Technician and has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road. Over the past 10 years, Hans has been focused on building CarCareKiosk, which is visited by millions of drivers each month.

2013 Ford Edge SE 2.0L 4 Cyl. Turbo Fuse (Engine) Check

Odd electrical problems that come out of nowhere can often signify a blown engine fuse - check and change yours here!

2013 Ford Edge SE 2.0L 4 Cyl. Turbo Tires & Wheels Change a Flat Tire

Learn where your spare tire and jack are located before you need it on the side of the road

2013 Ford Edge SE 2.0L 4 Cyl. Turbo Hoses Check Hoses

Coolant hoses wear out over time and need to be replaced - check 'em early and often

2013 Ford Edge SE 2.0L 4 Cyl. Turbo Oil Add Oil

Many cars will burn or leak a little bit of oil. Over time, this adds up and you might need to add some - learn how to here!