How to Clean Battery Corrosion: 2013 Ford Edge SE 2.0L 4 Cyl. Turbo

Ford Edge Model Years - 2011, 2012, 2013, 2014

1. Getting Started - Prepare for the repair

2. Open the Hood - How to pop the hood and prop it open

3. Access Battery - Learn where the battery is located

4. Remove Cables - How to disconnect the cables the right way

5. Clean Cables - Clean with baking soda, water and a wire brush

6. Connect Cables - Re-connect the cables in the right order

7. Replace Cover - Ensure the cover is put back properly

8. More Info. - Additional thoughts on corrosion prevention

Author

Hans Angermeier is an ASE certified Maintenance and Light Repair Technician and has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road. Over the past 10 years, Hans has been focused on building CarCareKiosk, which is visited by millions of drivers each month.

Share on   Share on Twitter   Share on Facebook
Parts & Tools
We may earn a commission from qualifying purchases as an Amazon Associate
Video Description

If the battery in your 2013 Ford Edge has crusty white or green build-up and corrosion on the clamps, posts or terminals, you can improve the performance and lifespan of your battery significantly by cleaning it. Your battery is depleted when it is used to start the car, but then recharged when you drive your Edge, the corrosion limits the ability for your Edge to recharge the battery when driving. The video above will show you the correct order to safely remove the battery clamps in your Edge and what to use to clean your battery terminals and clamps. We will also show you a tip for preventing this buildup in the future so the battery in your Edge will be optimally charged whenever you drive it!

Car batteries contain dangerous and flammable fluids. Always use safety glasses and gloves whenever working with the battery. Check out our parts page for great deals and coupons on safety glasses, gloves and battery terminal brushes for your Edge!

  • Advance Auto coupon for
    20% off entire order: KIOSK20
2013 Ford Edge SE 2.0L 4 Cyl. Turbo Brake Fluid Check Fluid Level

Stop! Checking your brake fluid from time to time is a great way to ensure safe stopping

2013 Ford Edge SE 2.0L 4 Cyl. Turbo Lights Turn Signal - Front (replace bulb)

If your blinker doesn't blink, or blinks rapidly, you likely have a burnt out bulb

2013 Ford Edge SE 2.0L 4 Cyl. Turbo Transmission Fluid Fix Leaks

Transmissions that leak fluid usually have never been flushed and the seal is finally leaking. The right stop leak product can cure a lot

2013 Ford Edge SE 2.0L 4 Cyl. Turbo Windshield Washer Fluid Add Fluid

One of the easiest fluids to top off - learn how to open the hood and where the reservoir is on your car