How to Add Coolant: Ford Edge (2011-2014)

Ford Edge Model Years - 2011, 2012, 2013, 2014

1. Getting Started - Prepare for the repair

2. Open the Hood - How to pop the hood and prop it open

3. Find Reservoir - Locate the coolant reservoir and clean it

4. Check Level - Determine the coolant level

5. Add Coolant - Determine coolant type and add fluid properly

6. Replace Cap - Secure the coolant reservoir cap

7. Locate Hoses - Locate the coolant hoses and connection points

8. Assess Hoses - Tips for how to assess the condition of the hoses

9. More Info. - Additional Information on adding Coolant

Share on   Share on Twitter   Share on Facebook
Video Description

Adding engine coolant (also known as antifreeze) to your 2013 Ford Edge is pretty easy. Engine coolant circulates through your engine to keep it cool in the summer but won't freeze in the winter. Make sure to check your engine when it is cold for an accurate reading. The video above shows you where the coolant reservoir in your Edge is located and how to add coolant. Be sure to check your owners manual to determine the correct type of fluid to add - for Fords, it will typically be in a section titled Fluid Capacities in the back of your manual. Mix the coolant with distilled water so that you have a combination of 50% coolant and 50% water. Some coolants will come premixed-that is, you don't need to add any water. These coolants will typically say 50/50 or pre-mixed on the front of the coolant bottle.

Removing the coolant reservoir cap on a warm engine could cause the cap to fly off at a high rate of speed and fluid to spray out of the reservoir. Always wear safety goggles when working on your Edge. Promptly wipe up any spilled fluid as it is highly toxic. Animals love its sweet taste, so even a spilling a small amount on your garage floor can end up in the dog's stomach pretty quickly. If you notice an oily surface in your coolant, immediately have your mechanic inspect your Edge for head gasket leakage

  • Advance Auto coupon for
    20% off entire order: KIOSK20

Author

Hans Angermeier is an ASE certified Maintenance and Light Repair Technician and has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road. Over the past 10 years, Hans has been focused on building CarCareKiosk, which is visited by millions of drivers each month.

2013 Ford Edge SE 2.0L 4 Cyl. Turbo Air Filter (Cabin) Check

Do you ever get into your friend's car and notice a bad smell? A dirty cabin air filter could be the culprit

2013 Ford Edge SE 2.0L 4 Cyl. Turbo Fuse (Interior) Replace

Got a short fuse? Don't blow a fuse, change it!

2013 Ford Edge SE 2.0L 4 Cyl. Turbo Battery Clean Battery & Terminals

If your battery has green or white cruddy deposits, it is probably not getting enough juice from and will likely wear out sooner

2013 Ford Edge SE 2.0L 4 Cyl. Turbo Hoses Fix Leaks

The best way to fix leaking hoses is to replace them, but if you don't have time, a stop leak product might work for you