Coolant Level Check on a 2013 Ford Escape SEL 2.0L 4 Cyl. Turbo

Ford Escape Model Years - 2013, 2014, 2015, 2016, 2017, 2018, 2019

1. Getting Started - Prepare for the repair

2. Open the Hood - How to pop the hood and prop it open

3. Find Reservoir - Locate the coolant / antifreeze reservoir and clean it

4. Check Level - Determine the coolant / antifreeze level

5. Add Coolant - Determine coolant / antifreeze type and add fluid properly

6. Replace Cap - Secure the coolant / antifreeze reservoir cap

7. Locate Hoses - Locate the coolant / antifreeze hoses and connection points

8. Assess Coolant/Radiator Hoses - Tips for how to assess the condition of the hoses

9. More Info. - Additional Information on adding coolant / antifreeze

Author

Hans Angermeier is an ASE certified Maintenance and Light Repair Technician and has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road. Over the past 10 years, Hans has been focused on building CarCareKiosk, which is visited by millions of drivers each month.

Share on   Share on Twitter   Share on Facebook
Parts & Tools
We may earn a commission from qualifying purchases as an Amazon Associate
Video Description

Checking the engine coolant (also known as antifreeze) level in your 2013 Ford Escape is pretty easy. In order to get an accurate reading, your 2.0 liter engine should be cool to the touch when you check it. Engine coolant / antifreeze circulates through your engine to keep it cool in the summer but won't freeze in the winter. The video above shows you where the coolant reservoir in your Escape is located and how to check the coolant / antifreeze level. If you need to add anti-freeze, be sure to check your owners manual to determine the correct type of coolant to add - in Fords, it usually located in a section titled Fluid Capacities towards the end of your manual. See our video on how to add engine coolant for tips on adding coolant to your Escape.

Always wear safety goggles when working on your Escape. Taking off the coolant reservoir cap on a warm engine could cause the cap to up explosively and fluid to spray out of the reservoir. If you notice an oily surface in your coolant, immediately have your mechanic inspect your Escape for head gasket leakage.

  • Advance Auto coupon for
    20% off entire order: KIOSK20
2013 Ford Escape SEL 2.0L 4 Cyl. Turbo Hoses Check Hoses

Coolant hoses wear out over time and need to be replaced - check 'em early and often

2013 Ford Escape SEL 2.0L 4 Cyl. Turbo Windshield Wiper Blade (Front) Replace Wiper Blades

Did you know that the sun wears out wiper blades faster than rain? Replace your blades twice a year

2013 Ford Escape SEL 2.0L 4 Cyl. Turbo Brake Fluid Add Fluid

If your brake fluid is a little low, learn how to add some here. Ignoring a low level leads to big problems

2013 Ford Escape SEL 2.0L 4 Cyl. Turbo Lights Brake Light (replace bulb)

Burnt out brake lights increase your chance of getting rear ended - check and change yours today