Reina helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
The video above shows you how to add oil to your 2013 Ford Flex. Before adding oil to your Flex, make sure that your engine was cold and that your car was parked on a level surface when you checked the oil level otherwise you won't be able to tell if your Flex has a low oil level. For most Fords, if your oil level is at the minimum mark on your dipstick, you should add about a quart of oil. If you are unsure how much oil to add to your Flex, add a little bit at a time and check your dipstick frequently. This video shows you where the oil fill cap is located on your Flex and how to add oil. Adding too much oil to your Flex can be harmful, so it is easiest to add a little at a time.
If you add too much oil to your Flex, you will need to remove some by loosening the drain plug underneath your engine - check out our video on how to change your oil & oil filter to see how to remove the excess oil.
Is the clock in your car ahead or behind? Learn how to set it here!2013 Ford Flex Limited 3.5L V6 Turbo Sport Utility (4 Door)
A check engine light can be cleared with a simple fix or it could be a major problem - find out now!2013 Ford Flex Limited 3.5L V6 Turbo Sport Utility (4 Door)
The burnt out tail light: classic reason for a cop to pull you over - change yours now2013 Ford Flex Limited 3.5L V6 Turbo Sport Utility (4 Door)
Dirty cabin air filter cause undue wear on your car's heater and AC and can cause bad odors2013 Ford Flex Limited 3.5L V6 Turbo Sport Utility (4 Door)
Did you know that heat is worse for your battery than cold? Replace it every 4 years2013 Ford Flex Limited 3.5L V6 Turbo Sport Utility (4 Door)