Honda City helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
The video above shows you to replace the headlight in your 2013 Ford Fusion. Headlights grow dimmer by up to 20% over time and eventually burn out - for this reason, we recommend changing your headlights in pairs. Changing both headlight bulbs on your Fusion at the same time will allow both bulbs to have the same intensity and prevent the new headlight bulb from appearing brighter than the bulb on the opposite side. In some Fords, the highbeam is the same bulb as the headlight and it is possible for the highbeam to work, but the headlight be burnt out even if they are the same bulb (and vise versa). Some Fords have high intensity discharge headlights, sometimes referred to as xenon lights. These bulbs have a very high voltage that runs through them, even if the battery is disconnected. If your Fusion has this type of bulb, we do not recommend that you attempt to change it yourself.
When you change the headlight on your Fusion, it is important to not touch the glass part of the bulb with your fingers because the oil from your fingertips will cause that part of the bulb to burn hotter, which significantly shortens the life of the bulb.
The best way to fix leaking hoses is to replace them, but if you don't have time, a stop leak product might work for you
2013 Ford Fusion SE 2.0L 4 Cyl. TurboYour coolant should perform well under any condition - just like Aaron Rodgers!
2013 Ford Fusion SE 2.0L 4 Cyl. TurboGot a short fuse? Don't blow a fuse, change it!
2013 Ford Fusion SE 2.0L 4 Cyl. TurboOne of the easiest fluids to top off - learn how to open the hood and where the reservoir is on your car
2013 Ford Fusion SE 2.0L 4 Cyl. TurboCoolant hoses wear out over time and need to be replaced - check 'em early and often
2013 Ford Fusion SE 2.0L 4 Cyl. Turbo
