1. Getting Started - Prepare for the repair
2. Open the Hood - How to pop the hood and prop it open
3. Remove Dipstick - Access point for transmission fluid
4. Add Fluid - Determine correct fluid type and add fluid
5. Replace Dipstick - Put the dipstick / cap back in place
6. More Info. - Additional information on adding trans. fluid
This video shows you how to add transmission fluid to your 2013 Ford Fusion. Before adding transmission fluid, make sure that your engine was running when you checked the fluid level. If the transmission fluid level on your Fusion is low, you need to add fluid through the dipstick tube. Ford has been developed sophisticated transmissions through years and it is critical that you add the exact type of transmission fluid stipulated by your owner's manual (typically in the back of the manual in a section titled Fluid Capacities.) When adding transmission fluid to your Fusion, be sure to add it slowly as the transmission fluid capacity is reached quickly and it is difficult to remove excess fluid if you overfill.
If you are having problems with the transmission in your Fusion, such as clunky shifting or hesitation, check the fluid level first - it is amazing how many drivers pay thousands of dollars for transmission work when a half quart of transmission fluid would have fixed the problem.
Hans Angermeier has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road.
Did you know that heat is worse for your battery than cold? Replace it every 4 years
Minor transmission fluid leaks can often be fixed with the right sealant - see how to do this
Learn where your air filter is located and how to determine if it needs to be changed.
Carmakers are hiding interior fuse boxes all over the place these days - see how to check your interior fuses here!