How to Add Oil: 2013 Mercedes-Benz E350 4Matic 3.5L V6 Sedan
Mercedes-Benz E350 Model Years - 2010, 2011, 2012, 2013, 2014, 2015, 2016
How to remove oil cap and add the correct oil type
Hans Angermeier is an ASE certified Maintenance and Light Repair Technician and has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road. Over the past 10 years, Hans has been focused on building CarCareKiosk, which is visited by millions of drivers each month.
Dirty cabin air filter cause undue wear on your car's heater and AC and can cause bad odors
Don't send mixed signals - if your turn signal doesn't blink, or blinks rapidly, you likely have a burnt out bulb
Odd electrical problems that come out of nowhere can often signify a blown engine fuse - check and change yours here!
- Lake Ford helped make these videos
- Feedback
- Download Mercedes-Benz owners manuals
The video above shows you how to add oil to your 2013 Mercedes-Benz E350. Before adding oil to your E350, make sure that your engine was cold and that your car was parked on a level surface when you checked the oil level otherwise you won't be able to tell if your E350 has a low oil level. For most Mercedes-Benzs, if your oil level is at the minimum mark on your dipstick, you should add about a quart of oil. If you are unsure how much oil to add to your E350, add a little bit at a time and check your dipstick frequently. This video shows you where the oil fill cap is located on your E350 and how to add oil. Adding too much oil to your E350 can be harmful, so it is easiest to add a little at a time.
If you add too much oil to your E350, you will need to remove some by loosening the drain plug underneath your engine - check out our video on how to change your oil & oil filter to see how to remove the excess oil.
- Advance Auto coupon for
20% off entire order: KIOSK20
