How to Add Refrigerant to a 2013 Nissan Titan SV 5.6L V8 Crew Cab Pickup

Nissan Titan Model Years - 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015

Where the low pressure A/C port is on 2013 Titan and how to add add freon

Author

Hans Angermeier is an ASE certified Maintenance and Light Repair Technician and has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road. Over the past 10 years, Hans has been focused on building CarCareKiosk, which is visited by millions of drivers each month.

2013 Nissan Titan SV 5.6L V8 Crew Cab Pickup Oil Fix Leaks

Learn how to diagnose and fix minor oil leaks in your car

2013 Nissan Titan SV 5.6L V8 Crew Cab Pickup Oil Change Oil and Oil Filter

Sure you can take it in for a $19 lube, but are you OK with a stripped oil pan and cheap parts in return?

2013 Nissan Titan SV 5.6L V8 Crew Cab Pickup Jack Up Car Use Your Jack to Raise Your Car

Where is the jack location, jack points and other tips on jacking up a vehicle

2013 Nissan Titan SV 5.6L V8 Crew Cab Pickup Coolant (Antifreeze) Fix Leaks

Leaking coolant is usually a sign that your water pump needs to be replaced. This video shows you how to quickly plug it

Share on   Share on Twitter   Share on Facebook
Parts & Tools
We may earn a commission from qualifying purchases as an Amazon Associate
Video Description

When the air conditioner in your 2013 Nissan Titan starts blowing hot air, you likely have a freon leak. Recharging the freon in your AC system is an inexpensive and easy first step to restoring the cooling capacity of your A/C system. Most refrigerants include a leak sealer that will seal small leaks in addition to filling the R134a freon. The A/C system in your Titan consists of a compressor that is belt-driven, an evaporator and freon. If there is a problem with your compressor or evaporator, adding freon will not restore cooling.

How do you recharge AC in a 2013 Nissan Titan? The low side AC port location is the first thing to find when you are looking for how to put freon in a car. Once you find the 2013 Titan AC low pressure port cap, hook up the can of refrigerant to the low pressure port. When your compressor kicks on, add freon to the correct pressure. In addition to cooling, freon lubricates the compressor when it runs. Typically the AC recharge kit you buy will have enough capacity to add enough freon to get the AC in your Titan to blow cold air.

What type of refrigerant does a 2013 Nissan Titan use? Air conditioning systems can vary so it is critical that you check the sticker in the engine bay to determine your Titan refrigerant type. There is an AC sticker in the engine bay of your 2013 Titan that indicates if it requires R134a refrigerant or the newer R1234YF type to do a recharge. You cannot add R1234YF refrigerant to a R134a system nor can you add R134a refrigerant to a R1234YF system. R134a and R1234YF have different low pressure port types, so you should never use a recharge adapter to add the wrong type of refrigerant. Recharging your Titan with the wrong type of freon can make the AC recharge cost much higher!

  • Advance Auto coupon for
    20% off entire order: KIOSK20