How to Check Brake Fluid Level: 2013 Scion FR-S 2.0L 4 Cyl.
Scion FR-S Model Years - 2013, 2014, 2015, 2016
1. Getting Started - Prepare for the repair
2. Open the Hood - How to pop the hood and prop it open
3. Find Reservoir - Locate the brake fluid reservoir and clean it
4. Check Level - Determine the brake fluid level
5. Add Fluid - Determine brake fluid type and add fluid properly
6. Replace Cap - Secure the brake fluid cap onto the reservoir
7. More Info. - Additional thoughts on adding brake fluid
Hans Angermeier is an ASE certified Maintenance and Light Repair Technician and has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road. Over the past 10 years, Hans has been focused on building CarCareKiosk, which is visited by millions of drivers each month.
- Diamond Jim helped make these videos
- Feedback
- Download Scion owners manuals
Checking the brake fluid in your 2013 Scion FR-S is easy and should be done once a month. On some Scions, the owners manual suggests pumping the brake pedal 25 times before looking at the fluid level, be sure to check your owners manual to see if this applies to your 2013 FR-S. In addition to checking the brake fluid level, you want to look at the color of the brake fluid in your FR-S - if it is dark in color or it has been more than 2 years since you have changed it, you should consider having it changed - this will help make the internal components (which are expensive) last much longer.
If you need to add fluid to your FR-S, it is important to check your owners manual for the correct type to add - it likely be either DOT 3, DOT 4 or DOT 5, also known as silicone brake fluid. Be sure to discard bottles of brake fluid that are over a year old - brake fluid sucks the moisture out of the air and the water vapor in the fluid can quickly rust out the brake lines in your FR-S.
- Advance Auto coupon for
20% off entire order: KIOSK20
Sure you can take it in for a $19 lube, but are you OK with a stripped oil pan and cheap parts in return?
Don't send mixed signals - if your turn signal doesn't blink, or blinks rapidly, you likely have a burnt out bulb
Transmissions that leak fluid usually have never been flushed and the seal is finally leaking. The right stop leak product can cure a lot