Check Engine Light is On: 2013 Toyota 4Runner Limited 4.0L V6

Toyota 4Runner Model Years - 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021

1. Getting Started - Prepare for the repair

2. Locate OBD Port - Find the OBD port on your vehicle

3. Scan for Codes - How to scan your vehicle for trouble codes

4. More Info. - Additional information on check engine lights

Author

Hans Angermeier is an ASE certified Maintenance and Light Repair Technician and has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road. Over the past 10 years, Hans has been focused on building CarCareKiosk, which is visited by millions of drivers each month.

Share on   Share on Twitter   Share on Facebook
Parts & Tools
We may earn a commission from qualifying purchases as an Amazon Associate
Video Description

A check engine light can indicate a broad spectrum of problems with your 2013 Toyota 4Runner. If you have a flashing check engine light, turn off the engine immediately to prevent potential motor damage. Whereas a steady check engine light may mean you merely need to tighten you gas cap next time you stop in order to reset the service engine soon light. The video above shows how to locate the on board diagnostics OBD plug location on your 2013 4Runner, how to read the trouble codes and how to reset or clear the check engine light using a scanner on your 4Runner.

Is it OK to drive with a check engine light on? Intermittent Check Engine Light: If the check engine light on your 2013 4Runner is not steady, try to take note of the conditions when this happens. For example, does it happen when you accelerating, driving on the highway or does it appear at low speeds? This will help your mechanic evaluate the issue. Steady Check Engine Light: If your check engine light is on every time you operate your 4Runner, you need to have it checked as soon as possible, especially if you notice performance problems or unusual noises. Flashing Check Engine Light: If your check engine light is flashing, stop driving your 4Runner and have it towed to your nearest mechanic – a blinking check engine light means you probably have a very serious problem with your car and you risk ruining your engine by driving it. If you are unsure about what your diagnostic trouble codes mean after finding the 4Runner OBD port location and scanning the codes; have your 4Runner diagnosed by a professional automotive technician.

  • Advance Auto coupon for
    20% off entire order: KIOSK20
2013 Toyota 4Runner Limited 4.0L V6 Lights Turn Signal - Front (replace bulb)

If your blinker doesn't blink, or blinks rapidly, you likely have a burnt out bulb

2013 Toyota 4Runner Limited 4.0L V6 Tires & Wheels Check Tire Pressure

Properly inflated tires is the easiest way to improve fuel economy. The right tire pressure is NOT on the side of your tire btw

2013 Toyota 4Runner Limited 4.0L V6 Lights Reverse Light (replace bulb)

White light when you back up - yup, they burn out and you can replace them with bright LEDs

2013 Toyota 4Runner Limited 4.0L V6 Jack Up Car Use Your Jack to Raise Your Car

Where is the jack location, jack points and other tips on jacking up a vehicle