Diamond Jim helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
The video above shows to check the coolant hoses in your 2014 Chevrolet Impala. The coolant hoses (radiator hoses) carry engine coolant through your engine and will eventually wear out. You can avoid getting stranded by identifying signs of extreme wear before they break. In 2014 Impalas with the 3.6 liter engine, coolant leaks are most likely to occur where the hoses connect to the engine, but it can also leak from the reservoir or from the hoses. Look for cracks in the hoses and analyze the brittleness or squishiness of the hoses in your Impala - if the hoses are hard to squeeze or squeeze very easily, it's time to replace them. The video above shows you where coolant hoses on your 2014 Impala LT are located and the steps needed to analyze them.
Never attempt to replace a hose that is connected to your air conditioner - these hoses contain refrigerant that is under pressure and can blind you. AC problems are always best left to your professional mechanic.
Leaking coolant is usually a sign that your water pump needs to be replaced. This video shows you how to quickly plug it2014 Chevrolet Impala LT 3.6L V6 FlexFuel
A/C blowing hot air?2014 Chevrolet Impala LT 3.6L V6 FlexFuel
Got a short fuse? Don't blow a fuse, change it!2014 Chevrolet Impala LT 3.6L V6 FlexFuel
If your brake fluid is a little low, learn how to add some here. Ignoring a low level leads to big problems2014 Chevrolet Impala LT 3.6L V6 FlexFuel
Don't send mixed signals - if your turn signal doesn't blink, or blinks rapidly, you likely have a burnt out bulb2014 Chevrolet Impala LT 3.6L V6 FlexFuel