Honda City helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
Checking the engine coolant (also known as antifreeze) level in your 2014 Ford Fusion is pretty easy. In order to get an accurate reading, your 2.5 liter engine should be cool to the touch when you check it. Engine coolant circulates through your engine to keep it cool in the summer but won't freeze in the winter. The video above shows you where the coolant reservoir in your Fusion is located and how to check the coolant level. If you need to add anti-freeze, be sure to check your owners manual to determine the correct type of coolant to add - in Fords, it usually located in a section titled Fluid Capacities towards the end of your manual. See our video on how to add engine coolant for tips on adding coolant to your Fusion.
Always wear safety goggles when working on your Fusion. Taking off the coolant reservoir cap on a warm engine could cause the cap to up explosively and fluid to spray out of the reservoir. If you notice an oily surface in your coolant, immediately have your mechanic inspect your Fusion for head gasket leakage.
A check engine light can be cleared with a simple fix or it could be a major problem - find out now!2014 Ford Fusion SE 2.5L 4 Cyl.
White light when you back up - yup, they burn out and you can replace them with bright LEDs2014 Ford Fusion SE 2.5L 4 Cyl.
DRLs are on more than your headlights. They burn out faster and should be replaced regularly2014 Ford Fusion SE 2.5L 4 Cyl.
A few key tips will make jacking up your car much safer2014 Ford Fusion SE 2.5L 4 Cyl.
Don't send mixed signals - if your turn signal doesn't blink, or blinks rapidly, you likely have a burnt out bulb2014 Ford Fusion SE 2.5L 4 Cyl.
Coolant hoses wear out over time and need to be replaced - check 'em early and often2014 Ford Fusion SE 2.5L 4 Cyl.