Braeger Ford helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
The video above shows you how to add oil to your 2014 Ford Fusion. Before adding oil to your Fusion, make sure that your engine was cold and that your car was parked on a level surface when you checked the oil level otherwise you won't be able to tell if your Fusion has a low oil level. For most Fords, if your oil level is at the minimum mark on your dipstick, you should add about a quart of oil. If you are unsure how much oil to add to your Fusion, add a little bit at a time and check your dipstick frequently. This video shows you where the oil fill cap is located on your Fusion and how to add oil. Adding too much oil to your Fusion can be harmful, so it is easiest to add a little at a time.
If you add too much oil to your Fusion, you will need to remove some by loosening the drain plug underneath your engine - check out our video on how to change your oil & oil filter to see how to remove the excess oil.
Small bulbs that burn out regularly - did you know you can replace these with LED lights?2014 Ford Fusion SE 2.5L 4 Cyl.
Odd electrical problems that come out of nowhere can often signify a blown engine fuse - check and change yours here!2014 Ford Fusion SE 2.5L 4 Cyl.
Leaking coolant is usually a sign that your water pump needs to be replaced. This video shows you how to quickly plug it2014 Ford Fusion SE 2.5L 4 Cyl.
Did you know that heat is worse for your battery than cold? Replace it every 4 years2014 Ford Fusion SE 2.5L 4 Cyl.
The best way to fix leaking hoses is to replace them, but if you don't have time, a stop leak product might work for you2014 Ford Fusion SE 2.5L 4 Cyl.
Coolant hoses wear out over time and need to be replaced - check 'em early and often2014 Ford Fusion SE 2.5L 4 Cyl.