David Hobbs helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
If the battery in your 2014 Jeep Wrangler has crusty white or green build-up and corrosion on the clamps, posts or terminals, you can improve the performance and lifespan of your battery significantly by cleaning it. Your battery is depleted when it is used to start the car, but then recharged when you drive your Wrangler, the corrosion limits the ability for your Wrangler to recharge the battery when driving. The video above will show you the correct order to safely remove the battery clamps in your Wrangler and what to use to clean your battery terminals and clamps. We will also show you a tip for preventing this buildup in the future so the battery in your Wrangler will be optimally charged whenever you drive it!
Car batteries contain dangerous and flammable fluids. Always use safety glasses and gloves whenever working with the battery. Check out our parts page for great deals and coupons on safety glasses, gloves and battery terminal brushes for your Wrangler!
Leaking coolant is usually a sign that your water pump needs to be replaced. This video shows you how to quickly plug it2014 Jeep Wrangler Sport 3.6L V6
Did you know that heat is worse for your battery than cold? Replace it every 4 years2014 Jeep Wrangler Sport 3.6L V6
Flushing the coolant in your car is not that hard and will extend the life of your engine tremendously - learn how here!2014 Jeep Wrangler Sport 3.6L V6
Got a short fuse? Don't blow a fuse, change it!2014 Jeep Wrangler Sport 3.6L V6
On many cars, the high beam bulb runs at reduced power during the day - check 'em and change 'em!2014 Jeep Wrangler Sport 3.6L V6
If you have an electrical component that doesn't work, try replacing the fuse first2014 Jeep Wrangler Sport 3.6L V6