How to Add Brake Fluid: 2014 Jeep Wrangler Sport 3.6L V6

Jeep Wrangler Model Years - 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017

How to add brake fluid and check brake fluid level

Author

Hans Angermeier is an ASE certified Maintenance and Light Repair Technician and has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road. Over the past 10 years, Hans has been focused on building CarCareKiosk, which is visited by millions of drivers each month.

2014 Jeep Wrangler Sport 3.6L V6 Air Filter (Cabin) Replace

Dirty cabin air filter cause undue wear on your car's heater and AC and can cause bad odors

2014 Jeep Wrangler Sport 3.6L V6 Check Engine Light Diagnose

A check engine light can be cleared with a simple fix or it could be a major problem - find out now!

2014 Jeep Wrangler Sport 3.6L V6 Lights Brake Light (replace bulb)

Burnt out brake lights increase your chance of getting rear ended - check and change yours today

2014 Jeep Wrangler Sport 3.6L V6 Transmission Fluid Fix Leaks

Transmissions that leak fluid usually have never been flushed and the seal is finally leaking. The right stop leak product can cure a lot

Share on   Share on Twitter   Share on Facebook
Parts & Tools
We may earn a commission from qualifying purchases as an Amazon Associate
Video Description

When you hit the brake pedal in your 2014 Jeep Wrangler it pumps brake fluid down to your brakes which increases the pressure to make your car slow down. If you don't have enough brake fluid in the brake fluid reservoir, air can get in your brake lines and your Wrangler won't stop properly. The video above shows you how to add brake fluid to your Jeep Wrangler. If you are adding brake fluid to your Wrangler on a regular basis, you should check for leaks (we have a video for this too!) As with most fluids in your engine, brake fluid can cause serious harm if you get it in your eyes, so be sure to wear safety glasses and gloves. Brake fluid will also make your paint peel off if you spill it on your Wrangler, so be careful not to spill it.

When adding fluid to your Wrangler, it is important to check your owners manual for the correct type to add - it likely be either DOT 3, DOT 4 or DOT 5, also known as silicone brake fluid. Do not shake the fluid before pouring it in your vehicle - the air bubbles will foul up your brake lines. Be sure to discard bottles of brake fluid that are over a year old - brake fluid sucks the moisture out of the air and the water vapor in the fluid can rust out your brake lines quickly. Brake fluid breaks down with use and should be changed every 2 years in your Jeep Wrangler or whenever it looks dark in color - this will make the internal brake components last longer.

  • Advance Auto coupon for
    20% off entire order: KIOSK20