1. Getting Started - Prepare for the repair
2. Open the Hood - How to pop the hood and prop it open
3. Find Reservoir - Locate the brake fluid reservoir and clean it
4. Check Level - Determine the brake fluid level
5. Add Fluid - Determine brake fluid type and add fluid properly
6. Replace Cap - Secure the brake fluid cap onto the reservoir
7. More Info. - Additional thoughts on adding brake fluid
Checking the brake fluid in your 2014 Jeep Wrangler is easy and should be done once a month. On some Jeeps, the owners manual suggests pumping the brake pedal 25 times before looking at the fluid level, be sure to check your owners manual to see if this applies to your 2014 Wrangler. In addition to checking the brake fluid level, you want to look at the color of the brake fluid in your Wrangler - if it is dark in color or it has been more than 2 years since you have changed it, you should consider having it changed - this will help make the internal components (which are expensive) last much longer.
If you need to add fluid to your Wrangler, it is important to check your owners manual for the correct type to add - it likely be either DOT 3, DOT 4 or DOT 5, also known as silicone brake fluid. Be sure to discard bottles of brake fluid that are over a year old - brake fluid sucks the moisture out of the air and the water vapor in the fluid can quickly rust out the brake lines in your Wrangler.
Hans Angermeier has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road.
Dirty cabin air filter cause undue wear on your car's heater and AC and can cause bad odors
If you are leaking oil and parking on your oil spots each night, the oil is breaking down your tires' rubber
If your car is leaking a small amount of power steering fluid - see this video on how to fix the leak
Burnt out brake lights increase your chance of getting rear ended - check and change yours today