1. Getting Started - Prepare for the repair
2. Open the Hood - How to pop the hood and prop it open
3. Remove Dipstick - Access point for transmission fluid
4. Add Fluid - Determine correct fluid type and add fluid
5. Replace Dipstick - Put the dipstick / cap back in place
6. More Info. - Additional information on checking trans. fluid levels
The engine in your 2015 Chevrolet Impala should be running when you perform a transmission fluid level check, otherwise it will be inaccurate. The video above shows where the transmission fluid dipstick is located in your Impala and how to check the transmission fluid level. If the transmission fluid level in your Impala is low, you need to add transmission fluid through the dipstick tube. When adding transmission fluid to your Impala, be sure to add it slowly as it will fill up quickly and is difficult to remove excess fluid if you overfill.
If you are having problems with the transmission in your Impala, such as clunky shifting or hesitation, check the fluid level first - it is amazing how many drivers pay thousands of dollars for transmission work when a half quart of transmission fluid would have fixed the problem.
Hans Angermeier has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road.
Did you know that heat is worse for your battery than cold? Replace it every 4 years
Flushing the coolant in your car is not that hard and will extend the life of your engine tremendously - learn how here!
The burnt out tail light: classic reason for a cop to pull you over - change yours now
If you have an electrical component that doesn't work, try replacing the fuse first