1. Getting Started - Prepare for the repair
2. Open the Hood - How to pop the hood and prop it open
3. Remove Dipstick - Locate, remove and wipe oil dipstick
4. Read Oil Level - Reinsert dipstick, remove and then read oil level
5. More Info. - Additional information on the oil level
Checking the oil in a 200 is fairly easy and should be done once a month. Note that most Chrysler have an oil pressure gauge next to the speedometer - this gauge does not tell you what your oil level is, however the video above will show you how check the oil level in your 2015 Chrysler 200. Make sure your engine is cold when you check the oil in your 200. Otherwise the dipstick will read slightly low. In addition to checking the oil level, you also want to look at the condition of the oil when you have the dipstick out. If the oil in your 200 is dirty or smells like gasoline, you probably need an oil change.
If you notice that the oil level in your 200 is extremely low or empty, fill it up and check it again the next time you drive. If it is extremely low again, have your mechanic take a look before driving it much more.
Hans Angermeier is an ASE certified Maintenance and Light Repair Technician and has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road. Over the past 10 years, Hans has been focused on building CarCareKiosk, which is visited by millions of drivers each month.
Your coolant should perform well under any condition - just like Aaron Rodgers!
Learn where your spare tire and jack are located before you need it on the side of the road
Learning how to jump your car before you need to is an excellent idea
Sure you can take it in for a $19 lube, but are you OK with a stripped oil pan and cheap parts in return?