1. Getting Started - Prepare for the repair
2. Open the Hood - How to pop the hood and prop it open
3. Remove Oil Cap - Take off the oil fill cap
4. Add Oil - Determine the correct oil type and add oil
5. Replace Cap - Put the oil fill cap back on the engine
6. More Info. - Additional information on adding oil
The video above shows you how to add oil to your 2016 Chevrolet Malibu. Before adding oil to your Malibu, make sure that your engine was cold and that your car was parked on a level surface when you checked the oil level otherwise you won't be able to tell if your Malibu has a low oil level. For most Chevrolets, if your oil level is at the minimum mark on your dipstick, you should add about a quart of oil. If you are unsure how much oil to add to your Malibu, add a little bit at a time and check your dipstick frequently. This video shows you where the oil fill cap is located on your Malibu and how to add oil. Adding too much oil to your Malibu can be harmful, so it is easiest to add a little at a time.
If you add too much oil to your Malibu, you will need to remove some by loosening the drain plug underneath your engine - check out our video on how to change your oil & oil filter to see how to remove the excess oil.
Hans Angermeier has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road.
Learning how to jump your car before you need to is an excellent idea
Is the clock in your car ahead or behind? Learn how to set it here!
Your coolant should perform well under any condition - just like Aaron Rodgers!
If your transmission is running low on fluid, be sure to add some - find out how to do this here!