Honda City helped make these videos
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car.
The video above shows you how to change a burnt out front turn signal bulb on your 2016 Ford Explorer. If the turn signal (also known as a blinker or flasher) blinks rapidly or doesn't blink at all / stays stuck when engaged, this is your Explorer's way of telling you that a turn signal bulb is burnt out. Troubleshooting for burnt out turn signal bulbs in your Explorer is relatively easy - turn your hazard lights on and check the front of your Explorer and then the back, whichever side is not illuminating is the side with the burnt out bulb. We recommend that you change both the driver and passenger side bulbs at the same time as they get dimmer over time and if one is out, then the other one is likely to burn out soon.
When changing the turn signal bulb in your Explorer, be careful not to touch the glass portion of the bulb with your fingers as this will cause the bulb to burn out prematurely.
Do you ever get into your friend's car and notice a bad smell? A dirty cabin air filter could be the culprit2016 Ford Explorer Limited 2.3L 4 Cyl. Turbo
A check engine light can be cleared with a simple fix or it could be a major problem - find out now!2016 Ford Explorer Limited 2.3L 4 Cyl. Turbo
Dirty cabin air filter cause undue wear on your car's heater and AC and can cause bad odors2016 Ford Explorer Limited 2.3L 4 Cyl. Turbo
Transmissions that leak fluid usually have never been flushed and the seal is finally leaking. The right stop leak product can cure a lot2016 Ford Explorer Limited 2.3L 4 Cyl. Turbo
A/C blowing hot air?2016 Ford Explorer Limited 2.3L 4 Cyl. Turbo