1. Getting Started - Prepare for the repair
2. Open the Hood - How to pop the hood and prop it open
3. Find Reservoir - Locate the brake fluid reservoir and clean it
4. Check Level - Determine the brake fluid level
5. Add Fluid - Determine brake fluid type and add fluid properly
6. Replace Cap - Secure the brake fluid cap onto the reservoir
7. More Info. - Additional thoughts on adding brake fluid
Checking the brake fluid in your 2018 Chevrolet Traverse is easy and should be done once a month. On some Chevrolets, the owners manual suggests pumping the brake pedal 25 times before looking at the fluid level, be sure to check your owners manual to see if this applies to your 2018 Traverse. In addition to checking the brake fluid level, you want to look at the color of the brake fluid in your Traverse - if it is dark in color or it has been more than 2 years since you have changed it, you should consider having it changed - this will help make the internal components (which are expensive) last much longer.
If you need to add fluid to your Traverse, it is important to check your owners manual for the correct type to add - it likely be either DOT 3, DOT 4 or DOT 5, also known as silicone brake fluid. Be sure to discard bottles of brake fluid that are over a year old - brake fluid sucks the moisture out of the air and the water vapor in the fluid can quickly rust out the brake lines in your Traverse.
Hans Angermeier has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road.
The best way to fix leaking hoses is to replace them, but if you don't have time, a stop leak product might work for you
Coolant hoses wear out over time and need to be replaced - check 'em early and often
If you have an electrical component that doesn't work, try replacing the fuse first
Cars burn, leak and otherwise dispense of their oil. Check your level frequently and top up when necessary